Breezy! Site

Hello.

I noticed this web site doesn't show images when web browsers' sendreferrers are blocked. When viewing one of the images directly, I see:

"This server has deemed the access as forbidden (403) (none) <my IP address deleted> /forums/images/statusicon/thread_hot.gif Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.11) Gecko/20100701 SeaMonkey/2.0.6

Is there a reason for this? I do not allow my web browsers to send referrers.

Thank you in advance. :)

Hello.

Is it me or does Linksys WRT54GL v1.1, with its firmware v4.30.13, not log "Incoming Log Table"? I see nothing in http://192.168.0.1/Log_incoming.asp (yes, I changed its IP address from its default 192.168.1.1):

Incoming Log Table
Source IP Destination Port Number


No IP addresses, etc. Just empty logs. I also tried power cycling the router too.

I do see logs in its outgoing though. I assume incoming log table is logging blockages and other datas. I tried power cycling the router and checking with other computers and web browsers too. :(

Thank you in advance. :)

I thought I needed some kind of uptime monitoring for my hosts and since tomato has no builtin tool for such purpose i've created one and now i'm releasing the source code under GPLv3, might be interesting for some of tomato users

https://sourceforge.net/projects/upmon/

I have a main router which will allow me to have and automatically update two dynamic DNS addresses. I would like to add a third and I have several access points on my system also running tomato. I'd like to have one of the access points to serve by updating the third dynamic DNS. The problem is that as an access point the WAN port is disabled. I see an option to use an external IP checker(every ten minutes). Would using this option check and correctly update the WAN IP on the main router for the purpose of updating the third Dynamic DNS?

I'm currently at a University and the wireless connection doesn't reach to my room so I'm interested in purchasing a router (I have a wired connection). While I'm at it I figured I might as well find a way to auto log on into the University's network and wanted to see if Tomato or a mod could help. Upon opening a web browser I'm redirected to a log on site where my username and password is required. Is there a way for me to automate this process through the router rather than scripts specifically on my computer (I'd like authentication to be done by the router so other devices such as a Kindle or Palm Pre can use the wifi without the credentials).



tl;dr.
Can I use Tomato to automatically input log on credentials?



P.S. If I can provide any additional information that would be helpful let me know.

Apologize if this has been covered somewhere but I searched and searched but could not find it.

I have tomato installed on my asus router. I often travel outside the country and need to set up something so thAt my iPad can access netflix/ abc etc. from outside the country.

I know that iPad allows you to enter a proxy server. Is there a way to use my home router in us as a proxy server?

Thanks

I have successfully flashed from dd-wrt to tomato usb.

My configuration is as follows; modem (SmartAX MT882)is connected to wan port of 520GU, then desktop is connected via a wired connection from a 520GU LAN port.

The problem is my desktop pc can't connect to the internet. Can anyone help changing some settings on tomato (and maybe my modem?) to get internet working over LAN.

tomato settings are currently default 192.168.1.1 etc.


Edit:

On tomato:

WAN:

DHCP
ip:192.168.1.2
mask:255.255.255.0
Gate:192.168.1.1
DNS: 192.168.1.1:80

LAN:
router ip:192.168.1.1
Sub: 255.255.255.0
DHCP:
192.168.1.100-192.168.1.149

On the modem I enabled bridge mode I believe this would be a first step.

Hello,

I installed the latest Tomato firmware on my v1.1 WRT54 Linksys router.

I can browse like crazy on the web from six different PCs. For weeks.

I just started today to play Battlefield 2 AIX Mod and am getting network disconnects every 10 minutes, with NO ONE ELSE on my home network.

Is this expected with default setting for Tomato? What can I do to fix this issue? Is there some QoS settings I need to make, I really don't know much about the QoS setting or what ports I need to muck around with to get Battlefield 2 to work without disconnects....

thanks,
Bob

Hello,

I was wondering what's going to happen to our routers and to Tomato when IPv6 comes out? Will it all become obsolete and useless?

Thanks!

As the title states my Netgear needs .chk from the default firmware but the TomatoUSB firmware is built as .trx. Can I simply rename the file to the .chk extension?
Or is there a firmware that I should flash to it inbetween.

Thanks for your help,
DF

Maybe someone can help me out with this. I have an Asus rt-n16 and I am on Tomato and am using the USB Red color scheme. My friend got an Asus rt-n12 and he really likes the color scheme which is not present in that Tomato build for the n12. I logged in with SCP and was able to copy out the two png graphic files as well as the css file from my 16n and renamed it to custom.css and threw it into the var/www folder as custom.css files usually go. I executed nvram commit through scp command option and it worked. However, it only works up until a reboot or shutdown/restart. Then the color scheme gets lost, and the files I transfered over had disappeared. Am I doing something wrong. I also tried to copy them into the native folder wwwext or something like that but I got a permisson denied (no write rights).

Any help would be appreciated.

(See attached photo for more info)


WRT546 > main router connected to Internet
> Various clients/computers connecting fine via DHCP
> WPA Encryption
> SSID Broadcast enabled (manual)

WRT54G > second router running tomato 1.28
> Would like to setup this router in the lower floor to wirelessly connect to the main router and to share the internet. I have 1 Desktop and 1 PS3 which I would like to wire into it.
Attached Images router_setup.JPG (22.4 KB)

...

More...

(See attached photo for more info)


WRT546 > main router connected to Internet
> Various clients/computers connecting fine via DHCP
> WPA Encryption
> SSID Broadcast enabled (manual)

WRT54G > second router running tomato 1.28
> Would like to setup this router in the lower floor to wirelessly connect to the main router and to share the internet. I have 1 Desktop and 1 PS3 which I would like to wire into it.
Attached Images router_setup.JPG (22.4 KB)

Hi.

I am running TomatoUSB with VPN on a RT-N16 and was wondering whether the following would be possible?

At the moment the router is connected to a paid openVPN service and the only thing connected to the router is a VOIP device that requires the aforementioned VPN.

What I wanted to do was setup a route / VLAN in such a way that the VPN is only used by the VOIP device and the rest of the clients that are connecting to the router are using the internet normally.

Is this possible?? I've tried searching everywhere for a solution to this but no luck yet.

Any help would be really appreciated.

Thanks!

I have connected two routers wirelessly (firmware version 1.28) in order to utilize a WDS (works perfectly). Before adding the second router I had enabled TCP Vegas on the primary router and found it really help with bandwidth issues. Now that I have added the second router should I also enable TCP Vegas on it? Will it make any difference at all?

Prior to adding the second router I was able to use remote access and get to my router over the internet. After adding the second router and enabling remote access on a different port (8080) I am still able to access only the first router.

Any tricks I should be aware of? I know could use SSH but our company blocks outgoing SSH connections.

I hope I have provided enough information.

Thanks in advance.

SAN JOSE, Calif., Sept. 2, 2010 – Cisco today announced that Free (Iliad Group), a leading broadband solutions operator in France, has deployed the Cisco® Carrier-Grade IPv6 Solution using Internet Protocol version 6 rapid deployment technology, also known as 6rd, allowing more than four million Free residential broadband customers to be a part of one of the world's largest live IPv6- ...

More...

SAN JOSE, Calif. - Sept. 2, 2010 - Cisco today announced its intent to acquire privately held Arch Rock Corporation, a pioneer in Internet Protocol-based wireless network technology for smart-grid applications. Based in San Francisco, Arch Rock will accelerate Cisco's ability to facilitate the utility industry's transition to an open and interoperable smart grid by enabling Cisco to offer a ...

More...

Hey guys, sorry for my noobness :redface:

This is what I am trying to do on my network:



I want to access the webcontrol device from my PC. It is a GUI type of device. I enter it's IP into my web browser and then gain access to it.

I have loaded the linksys with the tomato firmware. My issue is that I don't know enough about networking to really figure this out on my own. So, if you guys could give me some direction it would be much appreciated!

So far I know I need to turn the Linksys into a bridge... but that is about all I know. :redface:

Hello,

how do i read log messages from the pap2-device.

The error message "cant connect to server" is not very clear :-(

tnx